With Phase 2 of the Procurement + Accounting integration, Inn-Flow Procurement works as part of Inn-Flow instead of beside it. You sign in once on the Inn-Flow login page, open Procurement from the same menu as Accounting, see the purchase order (PO) number on every matched invoice, and receive deliveries against the invoices already sitting in your Accounting AP inbox. This article walks through each change and what it means for your day-to-day work.
What this feature does
Until now, Procurement (formerly Lilo) and Inn-Flow Accounting were two separate products: separate logins, and separate menus.You can now:
Sign in once, from Inn-Flow - Procurement users sign in on the Inn-Flow login page with the same account, and stay signed in as they move between modules.
Open Procurement from the Inn-Flow menu - Procurement sits in the left-hand menu next to Accounting, Labor and Sales, with its own sub-menus and the same look and feel.
See the PO number on the invoice - when an AP invoice is matched to a Procurement order, the PO number appears on the invoice as a link. One click opens the order.
Receive against the invoice (3-way matching) - Receiving reads invoices from the Accounting AP inbox, so the order, the invoice and what arrived are checked against each other in one place.
Note: If you don’t have access to the new Receiving, contact your Customer Success representative and we’ll reach out.
Signing in to Procurement from Inn-Flow
Procurement users now sign in on the Inn-Flow login page. There is no separate Procurement login, and no second sign-in when you move between Accounting and Procurement.
Step 1 - Sign in on the Inn-Flow login page
Go to inn-flow.net and enter your username and password. The first time, you can sign in with the same email address and password you used for Lilo. If you go to the old lilohq.com login, you are redirected to Inn-Flow automatically.
Figure 1. The Inn-Flow login page. Procurement users sign in here with the same email and password they used before.
Step 2 - Reset your password, if you need to
Click Forgot password/username? on the login page, enter the email address or username you sign in with, and click Send reset link. Inn-Flow emails you a link to choose a new password.
Figure 2. Reset your password. Enter the email or username you sign in with and Inn-Flow sends a reset link.
When you open the link, the Set a new password page asks you to choose a new password. Inn-Flow signs you in with a username, so after this reset you use the username instead of your email address.
Figure 3. Set a new password. Choose an Inn-Flow username, enter and confirm the new password, then click Save and sign in.
Step 3 - Sign in with your username from then on
After the reset, the login page confirms that your password was updated and reminds you of your new username. From then on, sign in with that username and your new password.
Figure 4. Back on the login page: the banner confirms the password was updated and that you now sign in with your username (here, omar.eid).
Procurement inside the Inn-Flow menu
Once you are signed in, Procurement appears in the Inn-Flow left-hand menu with every other module, directly below Sales. Click it to open Procurement — there is no new tab and no second sign-in.
Figure 5. The Inn-Flow menu with Procurement listed alongside Home, Communications, Business Intelligence, Accounting, Labor and Sales.
Procurement opens on its own Inn-Flow address, procurement.inn-flow.net, with the same left-hand rail, the same hotel selector and the same design as the rest of Inn-Flow. Its menus show in the same side panel you use for Accounting.
Figure 6. Procurement Home on procurement.inn-flow.net: latest updates, spend and savings for the last 30 days, recent orders, quick actions and GL code budgets. The Procurement menus sit in the same side panel as Accounting.
To go back to Accounting, click the Accounting icon in the left-hand rail. You stay signed in on inn-flow.net and can move back and forth between modules as often as you like.
The PO number on the invoice
When an AP invoice is matched to a Procurement order, the PO number now shows on the invoice in Accounting. You no longer need to look the order up by hand.
Step 1 - Open a matched invoice in Accounting
Go to Accounting › Accounts Payable › Invoice Approval (or the AP inbox) and open the invoice. The Purchase Order field shows the PO number the invoice was matched to, with a green Matched chip.
Figure 7. Invoice 88231407 in Accounting. The vendor invoice is on the left; the Purchase Order field on the right shows PO #10482 with a Matched chip.
Step 2 - Click the PO number to open the order
Click the PO number. The order opens in Procurement in a new browser tab, already signed in, and the invoice stays open in the first tab so you can switch between the two.
Figure 8. Hovering over the PO number: "Opens order #10482 in Procurement (new tab)".
Step 3 - Check the link from the order side
On the order in Procurement, the Payment panel shows the invoice number as a link, marked Matched in Accounting, so the link works in both directions.
Figure 9. Order #10482 in Procurement. The Payment panel links back to invoice #88231407 and shows that it was matched in Accounting.
3-way matching with Accounting AP
For customers who use Inn-Flow Accounting, Receiving now works from the invoices in the Accounting AP inbox. Each delivery shows its order and its matched invoice together, so you can check what was ordered, what was billed and what actually arrived — and receive only what arrived.
Figure 10. How 3-way matching works: the Procurement order (what was ordered), the invoice from the Accounting AP inbox (what was billed) and Receiving (what actually arrived).
Step 1 - Open Receiving
In Procurement, go to Inventory › Receiving. The tag at the top of the page shows that the list uses invoices from the Accounting AP inbox. Each row is one delivery: the vendor, the order, the matched invoice, a status and the invoice total compared with the order.
Figure 11. The Receiving queue. Each invoice carries an Accounting AP inbox tag, and each row has a single next-step button.
Status | What it means | Button |
Mapped | The invoice is matched to its order and ready to receive. | Start receiving |
Receiving | Receiving has started and some lines are still open. | Resume |
Needs mapping | Either the invoice has no order ("Not mapped"), or the order has no invoice yet. | Select an order / Select an invoice |
Received | Receiving is finished and the invoice has gone back to AP. | Go to AP |
Use the tabs at the top — All open, Needs mapping, In progress and Completed — to narrow the list, or search by vendor, order or invoice. If an invoice did not arrive by email, click Upload invoice; it is routed through Accounting AP like any other invoice.
Step 2 - Compare the order and the invoice
Click Start receiving. The order and its invoice open side by side, with the order total, the invoice total, the difference between them and the running received value underneath. In the Compare & receive table, every product is listed once and checked line by line.
Figure 12. Sysco delivery for order #10482 and invoice 88231407. The $73.10 difference is resolved line by line in the Compare & receive table.
Check | What it means | Can you receive it? |
Matches | Same product, quantity and price on the order and the invoice. | Yes |
Doesn't match | The product is on both, but the price or quantity differs — for example, "Invoice price is $2.25 higher per case". | Yes |
Not on order | The product was invoiced but never ordered. | Yes |
Not on invoice | The product was ordered but is not on the invoice. | No — Pending or Reject only |
Step 3 - Receive what arrived
For each line, confirm the quantity received, choose the storage location in Store, and click Receive, Pending or Reject. Received lines are marked Received and the Received value updates as you go. When every line is actioned, complete receiving and the invoice goes back to AP.
Figure 13. Receiving in progress: matching lines are received into the Walk-in cooler and the received value updates to $811.45. Lines missing from the invoice can only be set to Pending or Rejected.
Learn more
For the full receiving workflow — partial deliveries, rejecting a line and reporting it, adding a second invoice to an order — see How do I receive a delivery against its invoice?












